Infiniti FX50

1. Peel off the cover of the adhesive tape on Part 1. Place the thin edge against the seam/gap between the center console panel frame and the console edge. Place Part 1 so the top is aligned with the seam above the CD slot. 2. Press the thin edge firmly into the gap and at the same time bend Part 1 to the right until you see or hear/feel it click into place. 3. Press a screwdriver (Philips) firmly through the predrilled holes in Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape on Part 2 is on the left side. Do not press the tape to the center console panel frame yet. Screw Part 2 onto Part 1 using the enclosed screws. Right before you tighten the screws press the ProClip to the right with your thumb for optimal adjustment of the mount. Then press the adhesive tape on the left side of Part 2 to the center panel. Hold the ProClip in that position and tighten the crews.