Class D Four-Channel Full-Range Amplifier

4 x 150W RMS @ 1.5 – 4 ohm
2 x 300W RMS @ 3 – 8 ohm (2 Channel)

– Patented Technology: Single Cycle Control (U.S. Patent #6,084,450*)
– Differential-Balanced Input Topology: 2 pairs of inputs
– On-board Crossover: State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley, Low-Pass or High-Pass for each pair of channels
– Speaker output connections: Accept up to 12 AWG wire
– +12V and Ground connections: Accept up to 4 AWG wire

Specification:

– Rated Power (4 Channel Mode): 150 W RMS x 4 @ 1.5 ohm-4 ohm (11V-14.5V)
– Rated Power (Bridged to 2 Channel): 300 W RMS x 2 @ 3 ohm-8 ohm (11V-14.5V)
– THD at Rated Power: <0.03% @ 4 ohm per ch.
– S/N Ratio: >110 dB below rated power
– (A-weighted, 20 Hz – 20 kHz noise bandwidth)
– Frequency Response: 6 Hz – 30 kHz (+0, -1dB)
– Damping Factor: >300 @ 4 ohm per ch. / 50 Hz
>150 @ 2 ohm per ch. / 50 Hz
– Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS
– Dimensions (L x W x H): 10.74 in. x 8.29 in. x 1.93 in.
273 mm x 211 mm x 49 mm
(Width Measurement Includes Plugs)